Products

THERMOCOUPLE WELDER

Sparkweld Engineering is the dealer and supplier of Thermocouple Welder that is suitable for welding Thermocouple wires of different material to steel/alloy steel plate. One terminal is connected to plate by "Earth" magnet while Thermocouple wire to be welded in being held in ‘Nose Player’ and kept in contact with the plate. ‘Weld Switch/ Foot Switch’ is utilized in welding wire on the plate. Capacitors can be charged to different voltages to get different estimations of weld current.

Thermocouple Welder is appropriate for achieving weld joint within two Thermo wires. Pure Argon gas can be used to get a better weld joint. Two wires to be welded are being held in ‘Nose Player’ and kept in contact with ‘Carbon electrode’ given on the product. ‘Pre-flow and Post-flow’ of gas and ‘Weld trigger’ is being taken consideration naturally. Capacitors can be charged to various voltages to get different estimations of weld current.

The Thermocouple Welder is mainly designed to solve thermocouple fabrication and attachment problems.

Key features of Thermocouple Welder are as follows:

  • • Designed for production of commercial grade
  • • Special skills are not required to operate
  • • Standard accessories
  • • Wire holding pliers and lead
  • • Carbon electrodes
  • • Argon hose
  • • Power cord
  • • Foots witch for greater ease of use

The equipment is suitable for welding Thermocouple wires of different material to steel / alloy steel plate. One terminal is connected to plate by “Earth” magnet, while Thermocouple wire to be welded is being held in “Nose player” and kept in contact with plate. “Weld switch” / Foot switch is used to weld the wire on the plate. Capacitors can be charged to different voltages to get different values of weld current.

TECHNICAL SPECIFICATION
MODEL SCD - 01 E
VOLTAGE RATING 100~120V or 220~240V AC
STORE ENERGY OUTPUT 0-to 60 joules
CYCLE TIME Charging time at max. energy less than 3 sec.
WIRE GAUGE (0.5 ~ 1.1 mm/0.020" ~ 0.043")
THERMOCOUPLE TYPE Suitable for type K/J/E/T/N/R/S/B
WELD CYCLE Min. 5 to 10 weld / min
ENERGY INDICATOR LED display to indicate charging status
WELD TRIGGER Foot switch with 2 Met. Cable.
SUITABLE USE FOR Manufacturer / Workshop / Laboratory / Engineering Dept./
DIAMENSION 220(W) x 120(H) x 200(D) mm
WEIGHT 5 Kgs / 11 IBS
Technical Details Subject To Changes Without Notice.

The equipment is suitable for achieving weld joint (bead formation / couple) between two Thermo wires. Pure Argon gas can be used to get better weld joint. Two wires to be welded are being held in “Nose player” and kept in contact with “Carbon electrode” given on equipment. “Pre-flow and Post flow” of gas and “Weld trigger” is being taken care automatically. Capacitors can be charged to different voltages to get different values of weld current.

TECHNICAL SPECIFICATION
MODEL SCD - 01 E
VOLTAGE RATING 100~120V or 220~240V AC
STORE ENERGY OUTPUT 0-to 175 joules
CYCLE TIME Charging time at max. energy less than 10 sec.
WIRE GAUGE Low : 0.3 ~ 0.5 mm
Med : 0.5 - ~ 0.9 mm
HI : 0.9 - ~ 1.2 mm
THERMOCOUPLE TYPE Suitable for type K/J/E/T/N/R/S/B
WELD CYCLE Min. 5 to 10 weld / min
ENERGY CONTROLS 3 Position energy sockets (Low/Med/Hi)
ENERGY INDICATOR D.C. Volt display to indicate charging status
SUITABLE USE FOR Manufacturer / Workshop / Laboratory / Engineering Dept./
DIAMENSION 310(W) x 170(H) x 240(D) mm
WEIGHT 8 Kgs
WELDING ELECTRODES Pliers with 500mm. long cable Earthing clip with 1 Met. cable Carbon Electrodes - 05 Nos.
WELD TRIGGER Foot switch with 2 Met. Cable.
Technical Details Subject To Changes Without Notice.

We offer an extensive range of Stud welding consumables,weld studs,shear studs,ceramic ferrules,insulation pins (Studs) and lock washers required for ship building.